P1dB’s RF cable assemblies that bend at the connector

P1dB’s Tight-Flex™ cables

bend at the connector


P1dB’s Tight-Flex flexible RF cables are available with SMA, SMP, SMPM or 2.92mm connectors. P1dB’s triple-shield 0.104-inch cable will operate to 40GHz with 2.92mm connectors. Bend this cable just 0.2 inches (5mm) distance from the connector and make it fit into the tightest spaces.

P1dB’s Tight-Flex cables bend at the connector. The Tight-Flex cable/connector interface allows tight bending in areas that would normally require a right angle connector. P1dB’s Tight-Flex cable is a 0.104-inch outer diameter, triple shielded flexible cable with a bending radius of 0.2  inches (5mm). These cables are designed for phase stability during flexure.


P1dB stocks popular length SMA, 2.92mm, SMP and SMPM assemblies. The link titled P1CA-29M29M-ST085-12 will take you directly to P1dB’s website for 2.92mm male to 2.92mm male, 12-inch assemblies operating to 40 GHz, now in stock.
If you don’t find the connector combination or length option you need in the P1dB website Tight-Flex cable assembly section, contact P1dB:  sales@p1dB.com  for a quote.


P1dB can build a Tight-Flex cable with SMA, SMP, SMPM or 2.92mm connectors in lengths to meet your requirements. Use the link below to visit the Tight-Flex section on P1dB’s website or contact P1dB’s distributor RFMW Ltd.

P1dB TightFlex Cable Assemblies



Leave a Reply