Category Archives: Pigtail assemblies

P1dB’s RF cable assemblies that bend at the connector

P1dB’s Tight-Flex™ cables bend at the connector   P1dB’s Tight-Flex flexible RF cables are available with SMA, SMP, SMPM or 2.92mm connectors. P1dB’s triple-shield 0.104-inch cable will operate to 40GHz with 2.92mm connectors. Bend this cable just 0.2 inches (5mm) distance from the connector and make it fit into the tightest spaces. P1dB’s Tight-Flex cables bend at the connector. The read more »

RF Test Probes from P1dB

In Circuit RF ProbingA good method for probing an RF circuit is to use small diameter semi-rigid cables, commonly referred to as Pigtails, to inject an input signal or sample an output signal. Typical configuration is with an SMA female connector on one end and a straight cut semi-rigid cable on the opposite end. P1dB read more »

P1dB stocks 2.92mm & 2.4mm adapters and components

2.92mm and 2.4mm adapters from P1dB stock P1dB has popular high frequency connector adapters in stock. Our 2.92mm to 2.4mm between series adapters will operate to a maximum frequency of 40 GHz. For frequencies up to 27 GHz, the 3.5mm interface is popular for test benches. P1dB has 3.5mm to SMA adapters operating to 27 read more »