Edge launch PCB connectors from P1dB

 

Edge launch PCB connectors from P1dB

P1dB offers edge launch connectors for mating with Printed circuit boards. SMA for frequencies up to 27 GHz, 2.92mm operating to 40 GHz, 2.4mm up to 50 GHz and 1.85mm for DC to 67 GHz.

Designed to clamp to the circuit board edge, the edge launch connector is adjustable to accommodate various PCB thickness and is re-useable (non-solder compression).

Ideal for high-speed digital chip test, RF and millimeter-wave test and product development and engineering test and prototype.

Enables precision electrical test without soldering to the PCB.

2.92mm jack PCB edge launch, field replaceable.

 P1CO-29FEL-05/09-LP is a 2.92mm female (jack) 50 Ohm connector that operates to 40 GHz. It is a low profile edge launch connector that offers the best electrical match when mating with Microstrip printed circuit boards. This 40 GHz connector is field replaceable (non-solder attachment to PCB). The connector material is passivated stainless steel.

1.85mm jack PCB edge launch, frequency to 67 GHz

 P1CO-18FEL-05/09-LP is a 1.85mm female (jack) 50 Ohm connector that operates to 65 GHz. It is a low profile edge launch connector that offers best electrical match when mating with Microstrip printed circuit boards. This 65 GHz connector is field replaceable (non-solder attachment to PCB). The connector material is passivated stainless steel. Adjustable to accommodate PCB thickness up to 0.100 inches (2.54mm).

Leave a Reply